The LACP mode can be active or passive. At least one side of an aggregate much be configured for active mode. By default, the LACP mode in ProCurve switches is ...
HP Trunk LACP Port Status - Disabled ... Active or Passive. Have these been ... Also the status of physical ports D4-D7 on CORESW switch and 45-48 on LANSW ...
Setting the LACP mode to active or passive. lacp mode active | passive}. switch(config-lag-if)# lacp mode active. Setting the LACP mode to off. no lacp mode ...
2013年6月27日 — Log into the HP switch CLI, and enter configure mode; Identify the interfaces you want to use for the trunk and type: trunk 25-26 trk1 lacp
Dynamic LACP — Use the switch-negotiated dynamic LACP trunk when: – The port on the other end of the trunk link is configured for Active or Passive LACP. – You ...
For most installations, HP Switch recommends that you leave the port mode settings at Auto (the default). LACP also operates with Auto-10 , Auto-100 , and Auto- ...